Shaft-Clamp Block Set 8 D25
0.0.629.08

Shaft-Clamp Block Set 8 D25

0.0.629.08

Ver dados CAD Atribuir à lista de comparação Comparar produtos https://pt-product.item24.com/pt/directlink/pro/62908
Recursos especiais:
Os produtos item baseiam-se em diferentes dimensões modulares e respetivas ranhuras associadas do sistema. Os perfis das linhas 5, 6, 8, 10 e 12 precisam de tamanhos correspondentes de fixadores. Os perfis na Linha X incluem uma ranhura do sistema da Linha 8, mas possuem uma superfície particularmente lisa com raios de curva mínimos que os torna ideais para construções seladas.
Os componentes compatíveis com RoHS não contêm substâncias perigosas, como chumbo ou cádmio. A Diretiva 2002/95/CE (RoHS 1) limita a utilização de determinadas substâncias em dispositivos e componentes eletrónicos. Estes incluem baterias, etc.
Todas as substâncias são registadas de acordo com o regulamento REACH. O REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals – Registo, avaliação e autorização de substâncias químicas) garante que os utilizadores possuem informações precisas sobre o tipo e as propriedades dos materiais operacionais, lubrificantes, etc., com os quais possam entrar em contacto.
Unidade de entrega
Limite da escala
Preço
1 set
≥1
on application

on application

Mais informações sobre o produto

  • Atributos
  • Detalhes
  • Acessórios
  • Downloads
  • Classificação
Shaft-Clamp Block Set 8 D25
0.0.629.08

Atributos

Line
line 8
Delivery unit
1 set
Weight
m = 537 g
ESD
ESD-safe = No
Diameter
d = 25 mm
Shaft-Clamp Block Set 8 D25
0.0.629.08

Detalhes

2 Shaft-Clamp Blocks 8 D25, Al, anodized, natural
1 Block-End Cap Set 8 60x60, PA-GF, black
1 Block-Cap Set 8 D25, PA-GF, black
The application and characteristics of the modular ball-bush block guides are similar to those of the ball-bearing guide bushes. By separating the sliding carriage into two units, the distance between the points of support on the guides can be selected in accordance with the applied loads.
The special profiles of sizes 40x40 and 60x60 (with Line 8 grooves) accommodate both the shaft and the Ball Bushes.
The range of sizes and the different shaft diameters are designed to withstand applied loads ranging from 500 to 1500 N at a maximum travelling speed of 2 m/s. The Ball Bushes, which are sealed at both ends, and the high-quality grease filling ensure a long service life, even under difficult operating conditions.
It is advisable to carry out calculations to check the load-bearing capacity and service life and to make an allowance for the deflection of the guiding shafts in the case of longer strokes.
The Direct-Fastening Set is particularly suitable for connecting the profiles of the ball-bush block guides to other profiles, so that the profiles can be moved and no machining is required.
The Shaft-Clamp Blocks hold and clamp the shafts.
The shafts are clamped by means of appropriate grub screws.
Grooves of Profiles 8 can be used to secure the Bearing Blocks using fastening elements of Line 8.
Direct-Fastening Set 8 provides a particularly easy means of securing Bearing Blocks without need for machining.
The blocks can be pinned in the areas marked (depending on requirements).
Shaft-Clamp Block Set 8 D25
0.0.629.08

Acessórios/Assistência

Direct-Fastening Set 8, bright zinc-plated
Unidade de entrega
1 set
Artigo n.º
0.0.388.63

Downloads

Assembly instruction(233 KB)
Shaft-Clamp Block Set 8 D25
0.0.629.08

Classificações

As classificações são padrões de dados de produtos aplicáveis a toda a indústria, usados, entre outros, para apoiar o processamento estruturado em sistemas ERP e e-business. Precisa dos dados de classificação de todos os produtos item para o seu sistema e-procurement? Em caso afirmativo, não hesite em contactar-nos.
eCl@ss 11.0
23050792
eCl@ss 4.0
23050702
eCl@ss 4.1
23050702
eCl@ss 5.0
23050702
eCl@ss 5.1
23050702
eCl@ss 6.0.1
23050702
eCl@ss 7.1
23050702
eCl@ss 8.0
23050702
UNSPSC 7.0
31171506
UNSPSC 9.0
31171506
customs tariff number
76169990